Ballistics: Can your system deliver (and take) a hit?

Ballistics: Can your system deliver (and take) a hit?

I recently reassessed how I was using isometric training – and how I was seeing others use it – to see if I was applying it with the clarity and intent it deserves. That led me to rediscover isometrics as a highly controllable tool for developing strength, focus, joint-specific control and position under load. This follow-up explores the other end of the spectrum: ballistics. Where isometric training provides the challenge to create force without motion, ballistic movements demand acceleration with intent and the release of that power into the environment. Whether jumping, bounding, throwing or striking, ballistics provide insights into how well a system can organize and express force quickly, skillfully and effectively. It’s a reflection of how physiology, biomechanics, skill and experience work together. My focus is on understanding what ballistic movements represent, when and how to integrate them into training, and exploring what they can tell us about robustness, readiness, intent and resilience. Before getting into application, let’s distinguish between ballistic, explosive and rhythmic/controlled movements. These terms are often used interchangeably, but they describe different force-velocity characteristics – differences that influence how these movements are coached, assessed and integrated into training. Ballistic Ballistic movements are when force is applied rapidly and an implement (or the body) continues to move freely after release or “floats” briefly – like at the top of a Russian kettlebell swing or during the power phase of an Olympic lift before the catch. The defining trait is intent to project with no intentional deceleration by the mover. The system must accelerate with intent, then let go. Think: Jump and leave the ground, throw and let it fly, strike or kick and follow through. Compare an air squat to a jump squat: In an air squat, the person must decelerate near the top to stay grounded and controlled. In a jump squat, the goal is to accelerate through the terminal range and project upward. One controls and contains force; the other expresses and releases it – this is ballistic. Appearance of DoD visual imagery does not imply or constitute federal endorsement. Explosive Explosive movements generate high force and/or power quickly. The intent is to move with urgency, which drives central motor output and motor unit recruitment regardless of how fast the action occurs. The person remains in control throughout the movement. There’s a high rate of force development, or RFD, but the motion is typically constrained either by load, movement intent, or the requirement to decelerate or reverse direction. Explosive doesn’t always mean light or fast; it means sharp, decisive and high output within the task constraints. Think: A rapid concentric squat or bench press rep, or a clean pull loaded heavy enough that the bar never reaches a float, forcing the system to generate high force and velocity without transitioning into ballistic projection. Explosive also applies to isometric training, where the goal may be to contract explosively against an immovable object. Even though there’s no movement, the individual is still training RFD and initial impulse. It’s the internal effort and speed of recruitment that matter. All ballistic movements are explosive, but not all explosive intents are ballistic. A similar distinction shows up in upper body patterns. An explosive push-up, like a hand-release push-up, removes the stretch-shortening cycle by requiring an unloaded pause/release at the bottom. This forces the individual to produce force rapidly from a dead stop, training upper-body RFD and concentric intent. In contrast, a ballistic push-up, such as a clap push-up, demands enough acceleration to project the body off the ground. One is explosive from stillness; the other is ballistic through release. Appearance of DoD visual imagery does not imply or constitute federal endorsement. Rhythmic / Controlled In hypertrophy, strength and power training, rhythmic and controlled movements often emphasize sustained, repeatable effort over maximum force, velocity or projection. These efforts are characterized by intentional tempo, internal pacing, and the ability to maintain output under stress and strain across multiple reps and sets. The focus isn’t on maximal acceleration or launch. Instead, it’s about managing force over time, often with sub-maximal but continuous contractions. These movements require coordination, control and positional awareness, especially as fatigue accumulates. Think of this as the “durability domain” of strength and power work. The output may not spike to maximal levels, and the decay profile can take many forms. Appearance of DoD visual imagery does not imply or constitute federal endorsement. Why ballistics matter Ballistic training is dynamic, engaging, and taps into our desire to violently launch or strike something. It often looks like performance, but the value runs deeper: ballistics can reveal and develop how someone initiates, coordinates and recovers from high-speed, high-impact, high-consequence outputs. Ballistics help expose what matters in an objective, intuitive and even primal way. They belong not because they’re flashy, but because they can be a solid system-check. And when programmed well, they deliver multiple outcomes across different needs and populations. At the observed output level Ballistic movements test and train rapid force projection through neuromuscular, tissue and bio-mechanical systems in high-velocity conditions, revealing: + How well non-contractile tissues (tendons, ligaments, fascia) store and return energy. + How well the neuromuscular system and muscle-tendon units coordinate without lag. + How well intent can be expressed at terminal velocity across different load scenarios. It’s a check on the ability of the hardware (muscles, tendons, fascia, joints) and software (skill, experience and coordination) to express, store and redirect force. At the control / regulation level (bridge) Ballistics push the neurological and associated systems into real-time decision-making. They challenge us to: + Integrate perception, processing and decision making. + Time recruitment and sequencing precisely. + Scale output based on internal state and external goal. + Respond to high RFD demands without hesitation. This is where intent, anticipation, skill and reflex integration are on the menu. A clean pull that pops and a kettlebell swing that floats are not just reps; they are signals. Was there hesitation? Was it crisp? Did the bar or bell leak power? How do

Leverage isometrics or leave results on the table

Leverage isometrics or leave results on the table

Stop! Don’t move! We train for motion, but can we gain better performance through stillness? Isometric training has been around forever – most coaches know it, many have used it, yet it’s often filed under rehab, prehab, testing, or the warm-up, instead of being treated as a high-value driver of performance.  That’s a miss. Lately, I’ve been researching and prototyping different ways of integrating isometric strength training (props to Cal Deitz, Triphasic Training and Paul DiTuro for reigniting this focus). My question wasn’t whether isometrics work – it was whether I was actually using them well. When executed with intent, isometrics can build strength, drive hypertrophy, reinforce joint-specific stiffness, and improve explosive output. Add in the effects on blood pressure and brain health, and it’s clear that this training modality deserves a prominent place in most of our programs.  Let’s break down how execution style shapes different outcomes and go over some practical decision tools to (re)integrate isometrics into your gameplan with additional clarity and purpose.  What’s old is new… but better measured, analyzed and actioned Isometrics aren’t new. Coaches have been using them for decades, sometimes on purpose, sometimes by accident. They’ve shown up in powerlifting pauses, gymnastics holds, tempo training, wall sits, and “hold that rep” cues across every level of human performance training. What has evolved is how we think about intent and how we’re able to measure, visualize, train, assess and progressively load what matters. Force plates, load cells and even HRV tracking have given us more visibility into what’s going on during isometric training. Are we ramping or exploding to max force? Holding a sub max for a specific purpose? Delivering a quick spike to prime output? Or just stuck in a position without purpose? More importantly, we now have additional research and field evidence to say:  How you execute isometrics can matter as much as whether you’re doing them at all. Why I’ll argue isometrics belong in the HP professional’s toolkit Most of us were probably introduced to isometrics during Kinesiology 101, learning about contraction types, and then later saw them in the field primarily as a rehab tool or a brief pause between “real” reps. That context may have stuck. And for a long time, it made sense because there wasn’t as much field-ready guidance for when and how to use them beyond a few fixed-angle protocols or warm-up drills.  What’s changed is not so much isometrics themselves, but their range of use cases and our ability to apply them with more intent, management, control and precision – especially with the growing accessibility of technology.  Duration, intensity, joint angle, frequency and intent all shape the adaptation you’re driving. And when you match the stimulus to the goal, isometric training becomes one of the cleanest tools we have for producing both systemic and targeted effects, without adding excessive load or recovery cost. Today, isometric training is starting to fill critical gaps in programming: + When tissue needs high-force loading without high velocity and impact + When we want to reinforce and train joint position under load + When we need low-cost output strategies that don’t add fatigue + When other factors limit dynamic movement and range of motion It’s also one of the few modalities that adapts well to real-world constraints: tight space, limited equipment, compromised physical capabilities, short sessions or low training experience. In this sense, isometrics aren’t just a training method, but a coaching solution to target force, position and adaptation under clear, controllable conditions. And when programmed well, they can make your entire system more adaptable and scalable. Appearance of DoD visual imagery does not imply or constitute federal endorsement. Not all isometrics are created equal Just like not all dynamic lifts are the same, not all isometrics deliver precisely the same effect. The difference isn’t just the position or duration, it’s also intent – how the reps are executed. Before going further, it’s worth clarifying a few terms. The acronyms PIMA and HIMA come from neuromechanics and motor control research (notably the work of Schaefer & Bittmann; 2017–2023). Their definitions help distinguish two distinct isometric strategies: PIMA: Pushing Isometric Muscle Action (AKA overcoming isometrics)Involves intended force production against an immovable object. The person is actively trying to move the load, but no motion occurs.Example: Pulling against a fixed bar during an isometric mid-thigh pull  HIMA: Holding Isometric Muscle Action (AKA yielding isometrics)Involves resisting an external force to maintain position. The person is “absorbing” or controlling load rather than producing it.Example: Maintaining alignment and position during a loaded split squat hold or performing a plank These distinctions matter, especially when targeting specific adaptations like tendon integrity, force development, joint stabilization, postural awareness, or neural drive. From a programming standpoint, most isometric prescriptions fall into three execution styles: Sustained holds: Prolonged tension; either PIMA or HIMA, depending on setup. Ramp-up contractions: Gradual force buildup, typically during overcoming (PIMA). Ballistic or explosive isometrics: Rapid, high-intent force spikes for overcoming (PIMA), with a focus on rate of force development. These variants are not completely interchangeable. The way a contraction is cued, coached and constrained impacts how the body’s systems respond: PIMA often benefits from external feedback (e.g., pressing into a force plate or rig), which helps reinforce intent and maximal output. HIMA typically requires more internal focus and postural awareness, especially as fatigue accumulates, making it useful for developing reactive control and co-contraction patterns. The fatigue profiles also differ: PIMA tends to allow higher peak output but may be more neurologically taxing at maximal levels. HIMA generally shows earlier neuromuscular fatigue, due to continuous stabilization demands. Transfer can depend on execution style and context: Ballistic or ramp-up PIMA tends to transfer well to force- and power-dominant tasks (e.g., sprint starts, loaded jumps, collision readiness). HIMA-style holds are more likely to improve joint control, positional tolerance and tissue resilience especially in rehab/return to duty settings. The position alone doesn’t dictate the adaptation – execution does. If the coaching and execution intent don’t match the

From foundational movements to a movement operating system: Building durable, flexible readiness

From foundational movements to a movement operating system: Building durable, flexible readiness

In past blogs, we’ve explored how Foundational Movements can serve as a universal language for coaching, training and learning. We’ve looked at signals in the noise of modern performance, asked if the shift in our industry already happened, and explored how robustness, not just resilience, can be a first line of defense. This piece adds another layer to this ongoing narrative. If we want to keep moving the profession forward, we need more than exercises, modalities and tools. We need systems.  And not just any systems – systems that are durable and flexible. This is where the movement operating system, or mOS, has made an impact. What is the mOS? The mOS builds on the foundational movement framework and provides a structured, scalable way to connect movement quality to understanding and connecting programming, coaching, real-world training and performance. It’s called an “operating system” for a reason. Just like our phones need an OS to run different apps, the mOS is what allows strength, power, agility, mobility, conditioning, coaching and recovery protocols to run together without crashing. Instead of disconnected knowledge or siloed strategies, an mOS gives coaches and athletes a shared language that adapts to their environment, whether coaching a strength block, rehabbing post-injury, or managing a full unit in a time-constrained training session. The mOS helps coaches identify the foundational movement, analyze and adapt it using primary and secondary vectors, and make real-time decisions to improve performance. From attractors to action: How the mOS is designed to work At the center of the mOS are the foundational movements: plank, push, pull, rotate, hinge, squat, lunge, step, crawl and climb.  These aren’t just categories, they represent movement attractor states – relatively stable, repeatable positions and transitions that hold up under load, fatigue and environmental complexity. Think of them as default biomechanical patterns and neurological behaviors we lean on when executing expected movements or when we are challenged with novel environments or tasks.  But movement doesn’t happen in a vacuum. This is where primary and secondary vectors are useful.  + Primary vectors refer to the essential elements that define a movement: hand and foot placement, range of motion, and load direction. These shape the physics of how we organize ourselves around a task. + Secondary vectors include variables like tempo, equipment/tool selection, load placement, and environmental constraints – the modifiers that impact the feel and focus of the movement.  Once we understand these building blocks, we can execute, coach and adapt almost any movement in real time using what I call the mOS coaching loop. 1. Anchor the movement: Identify the root foundational movement – the core movement and its ideal attractor state. i.e. what is stable and what is mobile. Hint: A root foundational movement is not the same as an exercise; it is the root of many different exercises within the category. 2. Scan for key attractors: Assess if movement is meeting the essential positional and transitional competencies. 3. Triage the fault: Prioritize what matters most to modify/coach at the right time. 4. Apply the right cue or constraint: Use position or environment to steer the intended outcome. Hint: The most common fault I see is “over-coaching” vs. elegant teaching. 5. Step up* / Check down* / Repeat: Modify vectors and cueing as needed to achieve movement integrity and accumulate quality reps!  * Tip: I don’t typically use the terms “progression” and “regression” because a modification people call a “regression” can in fact be the way toward progress. So I tend to use “step up” vs. progression and “check down” for regression. Why durability + flexibility matter Recently, I worked with a team of tactical fitness instructors during a multi-day training. This was an experienced group – they weren’t just there to check a box, they were evaluating me and everything being covered through the lens of, “Does this work in our environment and under pressure?” And then something clicked. A seemingly simple drill, the active plank (a protocol I adapted from Pavel), became a breakthrough moment. We dialed into what “right” looks and feels like, using scalable standards and common terminology to enable real-time peer coaching. The instructors weren’t just performing the plank, they were feeling and coaching it better, adjusting on the fly, and learning how to communicate and leverage what they already knew to layer in new concepts and cues. After the course, the lead instructor told me he was already seeing the benefits. The training had sharpened how the team approached movement and created momentum for building smarter programming around it. “Everyone found it extremely valuable, and I’m already seeing the benefits from it. This group is highly adaptable and eager to learn and grow, so training like this will continue to be vital to the future success of the program.” This is what makes the mOS effective. It’s durable enough to anchor learning through shared standards and flexible enough to grow with professionals eager to deepen their skillsets. Less confusion, more coaching The mOS isn’t about complexity, it’s about clarity. In a professional landscape where it’s easy to become overwhelmed by tools, data, new job titles and pressure to “know it all,” the mOS offers a stable foundation. It helps separate signals from noise not by limiting possibilities, but by organizing them. It doesn’t try to be everything. It tries to be one thing: a system that connects movement to outcomes clearly, consistently and across environments. If we want to improve readiness, mitigate re-injury, and help develop better coaches, not just better workouts, we need to leverage systems that support clarity, adaptability and shared understanding. The mOS may not be a magic fix. But it is a framework that holds up under pressure. It resonates with professionals and end-users across disciplines and scales with different environments. It creates structure where there’s often confusion and empowers the kind of learning and coaching that sticks. What’s next? Upcoming topics will start to explore how we can extend our impact to training the mind. I’ll dig